How to Easily Set Up Your Macard WiFi Extender
How to Easily Set Up Your Macard WiFi Extender
Blog Article
Dealing with poor WiFi in certain parts of your home? This is a common issue, especially in larger houses. The Macard WiFi extender can help solve this by boosting your existing wireless network and improving coverage. This step-by-step guide will show you how to set it up quickly and efficiently.
Macard WiFi Extender Setup: 3 Different Ways
There are three primary methods for setting up your Macard extender. Each option is explained below to help you choose the one that best suits your needs.
Method 1: Setup Using the WPS Button (Fastest Way)
This is the quickest and easiest way to connect your extender—no cables needed.
Steps:
-
Place the extender near your router.
-
Plug it into a power outlet.
-
Make sure your router is powered on.
-
Press the WPS button on your router.
-
Within two minutes, press the WPS button on the extender.
-
The extender’s LED will start blinking.
-
Once the light becomes steady, the setup is complete.
Note: When using WPS, your extender automatically copies your router’s settings. You can still access its web interface if you want to make custom changes.
Method 2: Setup via Ethernet Cable
Steps:
-
Position the extender between the router and the area with weak signal.
-
Connect one end of an Ethernet cable to the router’s LAN port.
-
Plug the other end into the extender’s Ethernet port.
-
Turn on the extender.
After connecting via cable, open the web setup page to finish the configuration.
Method 3: Manual Configuration via Web Browser
If you prefer a hands-on approach or your router doesn't support WPS, try the manual setup method.
Steps:
-
Plug in the extender where your WiFi signal is weak.
-
Connect your device (laptop, smartphone, etc.) to the extender's network using WiFi or Ethernet.
-
Open a browser and type go.macard.online or 192.168.10.1 in the address bar.
-
Log in using the default credentials (found on the back of the extender).
-
Once logged in, the setup interface will appear.
-
Select your main WiFi network and enter the password.
-
Click “Connect” and wait a few seconds for the process to complete.
Afterward, you can manage advanced settings through the web interface if needed.
Tip:
If WPS and Ethernet setup don’t work, the manual method is a reliable fallback.
Wrapping Up
By following the instructions above, your Macard WiFi extender should now be up and running, helping you enjoy better internet connectivity across your home. Whether you choose WPS, Ethernet, or manual setup, the process is simple and effective.
Frequently Asked Questions
Q: Can the Macard extender connect to any brand of router?
Yes! The extender works with all standard routers. You can use WPS for a cable-free setup or switch to manual configuration if your router doesn’t support WPS.
Q: How do I reset the Macard WiFi extender?
To reset, press and hold the reset button (located on the back of the device) for about 10–15 seconds. Once reset, you’ll need to set it up again using one of the methods above.
Q: Why isn’t my extender connecting to the router?
Ensure that the WiFi name (SSID) and password are entered correctly. Also, check that the extender is properly plugged in and within range of the router. If problems continue, reset the device and try setting it up again.